VLCPG5100 www.vishay.com vishay semiconductors rev. 1.2, 29-apr-13 1 document number: 81719 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrabright led, ? 5 mm untinted non-diffused package description the VLCPG5100 is a clear, non-diffused 5 mm led for high end applications where supreme luminous intensity required. these lamps with clear untinted plastic case utilize the highly developed ultrabright alingap (as). the lens and the viewing angle is optimized to achieve best performance of light ou tput and visibility. product group and package data ? product group: led ?package: 5 mm ? product series: ultrabright ? angle of half intensity: 9 features ? untinted non-diffused lens ? utilizing ultrabright allngap (as) ? high luminous intensity ? high operating temperature: t j (chip junction temperature) up to 125 c for allngap devices ? luminous intensity and color categorized for each packing unit ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior lighting ? outdoor led panels ? instrumentation and front panel indicators ? central high mounted stop lights (chmsl) for motor vehicles ? replaces incandescent lamps ? traffic signals ? light guide design note (1) driving the led in reverse direction is suitable for a short term application 19223 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. VLCPG5100 pure green 430 1250 - 50 555 562 567 50 - 2.2 2.7 50 allngap on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? VLCPG5100 parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb ? 85 c i f 50 ma surge forward current t p ? 10 s i fsm 1a power dissi pation p v 135 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 300 k/w
VLCPG5100 www.vishay.com vishay semiconductors rev. 1.2, 29-apr-13 2 document number: 81719 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. ? 2.0 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers represent the order groups which include only a few brightness groups. only one group will be shipped on each bag (there will be no mixing of two groups on each bag). ? in order to ensure availabi lity, single brightness grou ps will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wa velength groups will be shipped in any one bag. ? in order to ensure availabi lity, single wavelength grou ps will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? VLCPG5100, pure green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma VLCPG5100 i v 430 1250 - mcd dominant wavelength i f = 50 ma ? d 555 562 567 nm peak wavelength i f = 50 ma ? p - 563 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ?? -20-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.22.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf -- 3.5-mv/k temperature coefficient of ? d i f = 50 ma tc ? d -0.1-nm/k luminous intensity classification group luminous intensity (mcd) standard min. max. bb 430 860 cc 575 1150 dd 750 1500 ee 1000 2000 ff 1350 2700 gg 1800 3600 hh 2400 4800 ii 3200 6400 kk 4300 8600 ll 5750 11 500 mm 7500 15 000 nn 10 000 20 000 pp 13 500 27 000 qq 18 000 36 000 rr 24 000 48 000 ss 32 000 64 000 tt 43 000 86 000 uu 57 500 115 000 color classification group dom. wavelength (nm) pure green min. max. 0 555 559 1 558 561 2 560 563 3 562 565 4 564 567
VLCPG5100 www.vishay.com vishay semiconductors rev. 1.2, 29-apr-13 3 document number: 81719 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative radiant sensitivity vs. angular displacement fig. 3 - forward current vs. forward voltage fig. 4 - relative intensity vs. wavelength fig. 5 - relative luminous flux vs. forward current fig. 6 - change of dominant wavelength vs. forward current 0 10 20 30 40 50 60 0 20406080100120 t amb - ambient temperature (c) 20722 i f - forward current (ma) pure green 0.4 0.2 0 s rel - relative sensitivity 94 8351 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 ? - angular displacement 0 10 20 30 40 50 60 70 80 90 100 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 v f - forward voltage (v) 20723 pure green i f - forward current (ma) 0.0 0.2 0.4 0.6 0.8 1.0 1 . 2 510 530 550 570 590 610 18648 pure green i v rel - relative luminous intensity - wavelength (nm) 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 18645 i v rel - relative luminous intensity pure green - 3 - 2 - 1 0 1 2 3 10 20 30 40 50 60 70 80 90 100 18650 - change of dom. wavelength (nm) d i f - forward current (ma) pure green
VLCPG5100 www.vishay.com vishay semiconductors rev. 1.2, 29-apr-13 4 document number: 81719 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative luminous in tensity vs. ambient temperature fig. 8 - change of dominant wa velength vs. ambient temperature fig. 9 - change of forward voltage vs. ambient temperature ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0.0 0.5 1.0 1.5 2.0 2.5 3.0 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18616 i v rel - relative luminous intensity pure green - 8 - 6 - 4 - 2 0 2 4 6 8 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18617 ? d - change of dom. wavelength (nm) pure green - 300 - 200 - 100 0 100 200 300 400 500 600 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18615 v f - change of forward voltage (mv) 10 ma 30 ma 50 ma pure green
VLCPG5100 www.vishay.com vishay semiconductors rev. 1.2, 29-apr-13 5 document number: 81719 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters 96 12121 2.54 nom. 35.9 0.55 ? 5.8 0.15 12.9 0.3 7.7 0.15 8.7 0.3 0.5 + 0.15 - 0.05 1 min. 1.1 0.25 (5.1) < 0.7 a c r 2.49 (sphere) area not plane ? 5 0.15 0.5 + 0.15 - 0.05 specifications according to din technical drawings drawing-no.: 6.544-5258.04-4 issue: 9; 23.07.10
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
